1 / 1
MLA-30+ Antenna Holder for EN20 (20 mm) tube — zdjęcie 1

MLA-30+ Antenna Holder for EN20 (20 mm) tube

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is my remixed antenna holder for commonly available tubes in Europe.

Ocena
0 / 5
Polubienia
3
Pobrania
22
Wydruki
0
Wyświetlenia
160
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

Very simple remix which suits commonly available installation tubes of 20 mm diameter.

If you are curious, I have modified the antenna:

  1. Cut Bias-T USB-Converter and directly power by 12V switching power supply

  2. Insert a transformer with 2:8 windings between antenna and PCB connectors (low impedance on the side of the antenna) - this matches the Amp-IC better than the original design and yields a more acceptable frequency response

  3. Insert back-to-back diodes to protect the IC from strong signals

  4. Replace the original antenna wire by a flexible copper tube

Random wire still has better reception lol

Tagi