Case with screw cap (revised)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small round case with screw cap
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Public Domain
Just starting out trying myself to do some Fusion360. One of a few first attempts at creating something with threads.
Version 2
Revisions
To make the top fit better and close completely I have redesigned the case fitting.
All thread faces have been reduces by 0.5 mm on the case
Chopped 2 mm from the top of the case thread so it closes completely
Now it all fits snuggly directly from the bed.
Print instructions
Basics
Orientation: Just as is
Supports: No
Layer height: 0.2mm
Walls: 2
Infill: 10% and up.
Advanced
Seam position: Random (in case of a noticeable seam on the sides of the lid and case)
Version 1
Might be a little to snug for you. I printed it with PETG and after opening and closing the thing 40 times it went smoothly.