1 / 4
The "No-Jam" AMS Y-Splitter + Mount for P1S — zdjęcie 1
1 / 4

The "No-Jam" AMS Y-Splitter + Mount for P1S

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A reliable Y-Splitter to connect an external spool alongside your AMS unit.

Ocena
0 / 5
Polubienia
3
Pobrania
23
Wydruki
0
Wyświetlenia
214
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Smooth Flow AMS Y-Splitter + Mounting Bracket

This is a Y-Splitter designed to allow the use of an external spool without disconnecting the AMS. It addresses common jamming issues found in other designs by using optimized internal geometry.

Key Features:

  • Optimized Internal Path: The internal channels are designed with a 2.6mm diameter (instead of the standard tight 2mm) to drastically reduce friction and accommodate filament variations.

  • Correct Threading: Modeled specifically for PC4-M10 pneumatics fittings (which are actually 1/8" BSPT), ensuring a tight and secure fit without cracking the plastic.

  • Bi-Directional Flow: Designed to handle both loading and retracting filament without snagging.

  • Includes Mount: Comes with a custom mounting bracket for easy installation on your P1S.

Bill of Materials (BOM):

  • 3x PC4-M10 Pneumatic Fittings

  • PTFE Tubing (Standard 4mm OD / 2.5mm ID recommended)

  • 1x 12mm M3-Screw

Print Instructions: I have tested this extensively to ensure smooth operation. Here are the recommended settings:

  • Material: PETG is recommended for durability, but PLA works fine too.

  • Orientation: Print vertically, standing on the single output tube. This ensures the internal layers are aligned with the filament path for least resistance.

  • Layer Height: 0.12mm (Critical! Lower layer heights create smoother internal walls).

  • Infill: 15%.

  • Supports: Required. I used custom painted supports insight the y splitter opening to support the overhangs, but not the threads!

Post-Processing Tip: For the best reliability, I highly recommend chamfering the inside of the PTFE tube that goes into the bottom (output) of the splitter. A small internal taper on the PTFE tube ensures the filament never catches on the lip during loading.

Tagi