The "No-Jam" AMS Y-Splitter + Mount for P1S
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A reliable Y-Splitter to connect an external spool alongside your AMS unit.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 23
- Makes
- 0
- Views
- 214
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Smooth Flow AMS Y-Splitter + Mounting Bracket
This is a Y-Splitter designed to allow the use of an external spool without disconnecting the AMS. It addresses common jamming issues found in other designs by using optimized internal geometry.
Key Features:
Optimized Internal Path: The internal channels are designed with a 2.6mm diameter (instead of the standard tight 2mm) to drastically reduce friction and accommodate filament variations.
Correct Threading: Modeled specifically for PC4-M10 pneumatics fittings (which are actually 1/8" BSPT), ensuring a tight and secure fit without cracking the plastic.
Bi-Directional Flow: Designed to handle both loading and retracting filament without snagging.
Includes Mount: Comes with a custom mounting bracket for easy installation on your P1S.
Bill of Materials (BOM):
3x PC4-M10 Pneumatic Fittings
PTFE Tubing (Standard 4mm OD / 2.5mm ID recommended)
1x 12mm M3-Screw
Print Instructions: I have tested this extensively to ensure smooth operation. Here are the recommended settings:
Material: PETG is recommended for durability, but PLA works fine too.
Orientation: Print vertically, standing on the single output tube. This ensures the internal layers are aligned with the filament path for least resistance.
Layer Height: 0.12mm (Critical! Lower layer heights create smoother internal walls).
Infill: 15%.
Supports: Required. I used custom painted supports insight the y splitter opening to support the overhangs, but not the threads!
Post-Processing Tip: For the best reliability, I highly recommend chamfering the inside of the PTFE tube that goes into the bottom (output) of the splitter. A small internal taper on the PTFE tube ensures the filament never catches on the lip during loading.