1 / 3
Gridfinity Samsung T7 SSD Holder (2x1) - Minimal Footprint — zdjęcie 1
1 / 3

Gridfinity Samsung T7 SSD Holder (2x1) - Minimal Footprint

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Compact 2x1 Gridfinity bin to store 1, 2 or 3 Samsung T7 portable SSDs vertically, or 2 drives + 2 Kingston DataTraveler

Ocena
0 / 5
Polubienia
3
Pobrania
37
Wydruki
0
Wyświetlenia
130
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution
About

I wanted to organize my Samsung T7 SSDs in my Gridfinity setup with the smallest possible footprint - ideally a 2×1 bin. After searching Printables and finding nothing that fit my needs, I decided to design my own using the gridfinity-rebuilt-openscad framework.

PS: I also attached a version for 2 drives + 2 Kingston DataTraveler Kyson

Features
  • Vertical storage for 1, 2 or 3 SSDs (parametric)

  • Rounded corners to match SSD shape

  • Minimal 2×1 footprint

  • No magnet holes

  • easy printing, no supports

If you just want to print as-is, use the STL file directly - no dependencies needed.

Available STL files

File

Slots

samsung-t7-ssd-holder-2x1x7-1-disk.stl

1

samsung-t7-ssd-holder-2x1x7-2-disks.stl

2

samsung-t7-ssd-holder-2x1x7-3-disks.stl

3

samsung-t7-ssd-holder-2x1x7-2disks-2usbs

 2 + 2 

OpenSCAD Source

The .scad file is fully parametric. It requires the gridfinity-rebuilt-openscad framework: https://github.com/kennetek/gridfinity-rebuilt-openscad

Parametric options:

  • ssd_count: 1, 2 or 3 slots

  • gridz: height (7 = half SSD exposed, 9 = one-third exposed)

  • tolerance_depth / tolerance_width: adjust fit for your printer

My print Settings
  • Layer height: 0.2mm

  • Infill: 10%

  • No supports needed

  • Material: PLA

  • Tested on Prusa MK4S

Tagi