1 / 1
Screw Cover Torx 25 — zdjęcie 1

Screw Cover Torx 25

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a cover that can be pressed into a T-25 screw to cover it.

Ocena
5 / 5
Polubienia
9
Pobrania
103
Wydruki
1
Wyświetlenia
541
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Public Domain

I wanted something to cover up the tan torx screws I used for mounting my shelf but was unable to find anything existing already. This was designed and tested with Deckmate T-25 screws. I'm sure it can be improved but printing with supports was very easy as they were simple to remove. I found printing with the pin down (like an umbrella) was the best, so far at least.

  • Printed in PLA
  • 0.2mm layer height
  • 20% infill
  • Support required

Tagi