ESP32 DevKit V1 Case with Snappable Lid / Barrel Plug Cutout
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ESP32 Case with Snappable Lid This case is designed to hold an ESP32 board as well as a standard female barrel plug to…
- Ocena
- 5 / 5
- Polubienia
- 72
- Pobrania
- 495
- Wydruki
- 1
- Wyświetlenia
- 3477
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
ESP32 Case with Snappable Lid
This case is designed to hold an ESP32 board as well as a standard female barrel plug to screw-terminal adapter. There is some room for additional wiring inside as well as an opening for connectors / cables. One version of the lid includes a viewing window so that the LEDs on the board can be seen. Printable windows are also provided - these can be printed in a transparent filament so that the LEDs glow through.
All parts are designed to be a tight fit and may require some tweaking for your particular printer. Snap lids are designed for one-time use but they can be opened and closed multiple times if you are careful.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.2
Infill:
Any% or none
Filament: Any PLA Any
Category: Electronics