Gridfinity compatible tray for Veritas router plane
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity compatible tray for Veritas full size router plane including accessories
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 100
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
base was made in half-size (21mm) grid as my other router trays are also 9 half-tiles long and it seemed to be a good size. It fits on a normal 42mm grid.
If you want to design something yourself the plane should fit on a 4x4 42mm grid; but it would be a bit tight. I used a 124x124mm square here, and wouldn't dare going smaller.
The fit is a bit loose as I used a simple square for a non-square router foot; this way orientation doen't matter.
Includes storage for two 12mm or 1/2" cutters, a 6mm or 1/4" cutter and a sharpening jig. As you will probably have a different combination of accessories I included the freecad file so you can adjust storage.