Gridfinity compatible tray for Veritas router plane
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gridfinity compatible tray for Veritas full size router plane including accessories
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 16
- Makes
- 0
- Views
- 100
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
base was made in half-size (21mm) grid as my other router trays are also 9 half-tiles long and it seemed to be a good size. It fits on a normal 42mm grid.
If you want to design something yourself the plane should fit on a 4x4 42mm grid; but it would be a bit tight. I used a 124x124mm square here, and wouldn't dare going smaller.
The fit is a bit loose as I used a simple square for a non-square router foot; this way orientation doen't matter.
Includes storage for two 12mm or 1/2" cutters, a 6mm or 1/4" cutter and a sharpening jig. As you will probably have a different combination of accessories I included the freecad file so you can adjust storage.