Card caddy (Parameterized)

This is a fully parametric card caddy. I have been making a few box's for different card sets and got annoyed editing each file to fit, so I decided to learn parametric modeling, this is my first go at it, hopefully it works well for you.

You can adapt this model to your exact needs with just a few parameter changes.

Every major dimension is controlled by parameters (I have marked the most important ones):

Open the ".f3d" file in fusion 360 Click "Modify>Change Parameters".

• Card width, length, and height (most important)

• Hinge distance, hinge height (important if changing size drastically)

• Wall thickness and base thickness

• Inner and outer corner radii

• Rail height and bottom ledge size

• Chamfers, fillets, and clearances

Change the card size and the entire model updates automatically — no broken features, no distorted geometry (hopefully!).

The lid clearance is calculated using a hinge arc, so the lid swings freely. As you adjust hinge height or distance, the clearance cut updates.

Built in clearances so you can put in the true size of the cards and the model will update to allow some "room" around them.

The hole on the base indicates the front where the lid clearance is included so make sure to keep that at the front.

I designed this to work with Whity's Rugged box but don't see why it wont work for others.

If you find any problems let me know and I'll try and get them fixed up.