1 / 1
Magnetic Dust Collection Connectors for 50mm hose - Single and Twin outlets.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic Dust Collection Connectors for 50mm hose - Single and Twin outlets.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 275
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
This is a remix of Robert Bieber's Magnetic Dust Collection Connectors for 50mm hose. I have included models for single and twin outlets.
I have also modified the original model to use 10x3 mm magnets and provided the O-ring as a separate part so that it can be printed face down without supports. The O-ring can be glued in place, but I actually found it wasn't really necessary at all.
I printed with PETG 0.28mm DRAFT settings in PrusaSlicer which seems to be working fine so far.