Grid Pattern for Laser Cutting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This grid pattern acts as seperator between the wasteboard and the cutting material while laser cutting.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 171
- Wydruki
- 0
- Wyświetlenia
- 1402
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
General
This grid pattern is designed to act as a seperator between the wasteboard and the cutting material while cutting with Diode Lasers. Spacing the workpiece from the wasteboard should give a cleaner cut, especially on the backside of the material.
This part is intended to be easily replacable, as it will likely degrade with continued usage. I recommending using a white fillament for miniumum laser engergy absorption.
Sizes
Available sizes are: 150x150mm and 300mmx300mm. The grid spacing is 10mm.
There are two provided height options: 25mm and 50mm (Z-Scaling can be used within your Slicer to achieve any other height)
Printing Information
The design features walls with 0.5mm thickness, allowing each wall to be printed in a single pass with a 0.4mm nozzle. To achieve single wall thickness you can either use the pre-sliced .3mf files within PrusaSlicer or adjust the following settings manually:
- Perimeters: 1
- Detect thin walls: On
- Outer Wall/Permieter: 0,5mm
If you have corner lifting issues, consider using a Brim.