Grid Pattern for Laser Cutting
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This grid pattern acts as seperator between the wasteboard and the cutting material while laser cutting.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 171
- Makes
- 0
- Views
- 1,402
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
General
This grid pattern is designed to act as a seperator between the wasteboard and the cutting material while cutting with Diode Lasers. Spacing the workpiece from the wasteboard should give a cleaner cut, especially on the backside of the material.
This part is intended to be easily replacable, as it will likely degrade with continued usage. I recommending using a white fillament for miniumum laser engergy absorption.
Sizes
Available sizes are: 150x150mm and 300mmx300mm. The grid spacing is 10mm.
There are two provided height options: 25mm and 50mm (Z-Scaling can be used within your Slicer to achieve any other height)
Printing Information
The design features walls with 0.5mm thickness, allowing each wall to be printed in a single pass with a 0.4mm nozzle. To achieve single wall thickness you can either use the pre-sliced .3mf files within PrusaSlicer or adjust the following settings manually:
- Perimeters: 1
- Detect thin walls: On
- Outer Wall/Permieter: 0,5mm
If you have corner lifting issues, consider using a Brim.