Heavy-Duty ESP32 Industrial Wall Mount Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a robust, industrial-style enclosure designed specifically for ESP32 development boards.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 154
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Upgrade your IoT projects with this Heavy-Duty ESP32 enclosure designed for stability and ease of use. This industrial-style case is perfect for smart home hubs, sensors, or permanent installations where a secure wall mount is required.
Why choose this design?
4-Point Rock-Solid Mounting: Unlike basic cases, this model features four reinforced mounting tabs to ensure it never wobbles or tilts once screwed to a surface.
Zero-Screw PCB Installation: The interior is engineered with precision guide rails, allowing your ESP32 board to slide perfectly into place and stay secure without needing tiny, easily-lost screws.
Clean Cable Management: A generous "U-shaped" cutout at the base provides ample room for USB power cables or multiple sensor wires.
Designed for Reliability: Thick walls and an open-top design provide a balance between physical protection and natural heat dissipation for your microcontroller.
Print Settings
Orientation: Lay the piece flat on its back (the side with the screw holes).
Supports: None! The geometry is optimized to print perfectly without any support material in this orientation.
Material: PLA (standard) or PETG (for durability/heat resistance).
Walls: 3-4 perimeters for strong mounting tabs.
Infill: 15% to 20% (Gyroid recommended).