CoreOne - Low Profile 100mm Exhaust Attachment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Low profile (4cm tall) attachment for a 100mm exhaust tube. Attaches to the printer with 4 m3 screws. STL/F3D available.
- Ocena
- 4 / 5
- Polubienia
- 6
- Pobrania
- 28
- Wydruki
- 2
- Wyświetlenia
- 120
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Open Community License v1
I couldn't find a low profile exhaust attachment for the CoreOne as I wanted to have it turn off to the side as soon as possible. So I made my own.
The outer diameter of the circle is actually 102mm as that was a better match for the tube that I bought and meant that I didn't need to clamp it as tightly.
I recommend printing the TubeFittingTest.3mf file and then if needed update diameter in the included f3d/STEP file. The Fusion360 project is fully parametric so just hit Ctrl+P and update the ExhaustDiameter variable.