Stackable Shoe Rack dual color + printable board
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dual color version of the stackable show rack part and printable board
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 319
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 30/03/2026:
M8 board
middle part for second level (notch for locking on the the previous level)
misc fixes
Wanted to utilize multi-material printing so made a dual color version of the rack side panel. For this I decided that best result is achieved if the honeycomb is already in the base model.
Also wanted to use lots of PETG so I designed a printable 1 meter long board with voronoi pattern. Full board is available in case you are lucky enough to have big enough printer, along with the board split into 4 parts.
I also designed board end parts to lock the printable board in place. The included spacers are for aligning the split board parts.
The split board parts are joined together with 2 M6 threaded rods. You'll also need 2 M6 nylock nuts, 2 M6 nuts and 4 M6 washers. The end parts use 4 ~12mm M3 sunk head screws.
Since the printed board probably is not strong enough, even with the threaded rods, a middle support part is also available and recommended.
I used PETG for side panels and recycled PETG + PET mix for the board. 0.6mm nozzle, 0.24mm layers, 3 perimeters and 30% or so infill.
OpenSCAD source: https://github.com/spegelius/3DModels/tree/master/Stackable_Shoe_Rack_remix