Stackable Shoe Rack dual color + printable board
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dual color version of the stackable show rack part and printable board
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 28
- Makes
- 0
- Views
- 319
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 30/03/2026:
M8 board
middle part for second level (notch for locking on the the previous level)
misc fixes
Wanted to utilize multi-material printing so made a dual color version of the rack side panel. For this I decided that best result is achieved if the honeycomb is already in the base model.
Also wanted to use lots of PETG so I designed a printable 1 meter long board with voronoi pattern. Full board is available in case you are lucky enough to have big enough printer, along with the board split into 4 parts.
I also designed board end parts to lock the printable board in place. The included spacers are for aligning the split board parts.
The split board parts are joined together with 2 M6 threaded rods. You'll also need 2 M6 nylock nuts, 2 M6 nuts and 4 M6 washers. The end parts use 4 ~12mm M3 sunk head screws.
Since the printed board probably is not strong enough, even with the threaded rods, a middle support part is also available and recommended.
I used PETG for side panels and recycled PETG + PET mix for the board. 0.6mm nozzle, 0.24mm layers, 3 perimeters and 30% or so infill.
OpenSCAD source: https://github.com/spegelius/3DModels/tree/master/Stackable_Shoe_Rack_remix