1 / 2
Food dehydrator (235mm) filamentdryer with thermometer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Food dehydrator mod with thermometer/hygrometer addition
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 74
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
As the summary says. Used @philiip11 model for thermometer hole reference. Print with PETG/ABS. For food dehydrator with a diameter of ~235mm.
There's also a shim in case the model is too loose.
OpenSCAD source: https://github.com/spegelius/3DModels/tree/master/Food_dehydrator_extension_remix