Spinnaker Pole selfie stick saddle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a pipe saddle used to stabilize a 26mm selfie stick mounted under a 38.3mm spinaker pole on a hobie cat or nacra
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
I use this mounting bracket to stabilize a selfie stick under my spinnaker pole on a hobiecat sailboat. Initially I had taped the selfie stick to the spi pole, but it would not stay perfectly aligned. This saddle fits tightly on both profiles and locks it into place so it doesn't roll or pivot.
Works well as-is, but feel free to make improvements. My spi pole measured 38.3mm in diameter. The selfie stick was slightly tapered, so I have a 26mm and 26.3 mm version to prevent any slop. I still use a heavy vinyl tape overwrap for attachment, so this saddle device is only to stabilize the mounting point as shown in the photos.