Early Hermes Ambassador typewriter rubber foot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement rubber foot for early Hermes Ambassador typewriters. Tested with 1951 model.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 36
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
This is a replacement rubber foot for early Hermes Ambassador typewriters. I designed it specifically for a 1951 model. I know it won't fit some 1970s models, but I am not sure about other models. Like the original rubber, this fits in the large metal cup, and the smaller metal part fits inside. I made the rubber protrude under the machine by about 4 mm. I don't know how far the original protruded, but this is enough, and can be adjusted if needed.
Print settings:
print upside down, with the narrow part on the plate
I used Siraya Tech Flex TPU - 85A Filament
Shore 95A TPU is too hard.
Softer TPU should work as well, but I haven't tried.
85A gives decent grip on a smooth surface.
I fed the TPU directly to the extruder, no PTFE tubing.