Early Hermes Ambassador typewriter rubber foot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement rubber foot for early Hermes Ambassador typewriters. Tested with 1951 model.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 36
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Share Alike
This is a replacement rubber foot for early Hermes Ambassador typewriters. I designed it specifically for a 1951 model. I know it won't fit some 1970s models, but I am not sure about other models. Like the original rubber, this fits in the large metal cup, and the smaller metal part fits inside. I made the rubber protrude under the machine by about 4 mm. I don't know how far the original protruded, but this is enough, and can be adjusted if needed.
Print settings:
print upside down, with the narrow part on the plate
I used Siraya Tech Flex TPU - 85A Filament
Shore 95A TPU is too hard.
Softer TPU should work as well, but I haven't tried.
85A gives decent grip on a smooth surface.
I fed the TPU directly to the extruder, no PTFE tubing.