Technics SA400 SA500 E10 lamp holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Alternative E10-lamp holder for Technics SA400 and SA500 receivers
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I recently repaired a Technics SA-400 receiver and, in the process, converted the lighting to LEDs. Since suitable BA9S LED bulbs are quite expensive (at least in my country) and installation in the spring-loaded sockets is very fiddly, I simply made a few new holders that accommodate the more common E10 socket. To convert, simply remove the original brackets and attach the new ones to the metal tabs.
The holders should definitely fit the larger SA-500, and they may also fit other models. You can get an idea from the photos.
Please note that the original lamps operate on alternating current. Therefore, when converting to LED replacement bulbs, a small bridge rectifier should also be connected in front of the LEDs. I used a DBL207G.