Baby Jack -- O'Lantern - fits $1 store LED tealight
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Happy Baby Jack O'Lantern fits over dollar store LED tealights. Three flavors. With a face With a face and Meshmixer…
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 205
- Wydruki
- 1
- Wyświetlenia
- 976
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Happy Baby Jack O'Lantern fits over dollar store LED tealights.
Three flavors.
- With a face
- With a face and Meshmixer supports
- Faceless
UPDATE: added an an adapter. Baby jack was designed for the white LED tealights. Bit of you get the metallic ones, they are a bit narrower. If the tealight do not fit snuggly, then try the adapter.
Also have a Scrappy Jack version.
Print Settings
Printer:
Tronxy X3
Rafts:
No
Supports:
Yes
Resolution:
0.24mm
Infill:
10-20%
Notes:
Printed in cheap. Orange ABS on my Tronxy X3 with my soon to be released fan shroud so you can get to ABS temps.
2 shells. 6 top layers. Generate supports if not using Meshmixer version. Simplify3D and Cura worked best. Be sure front teeth are supported.
Post-Printing
Remove supports. Add a tealight.
I used these LED tealights from a local DollarTree.
For a cool texture, brush on acetone. Let it dry a little, then blast it with a heat gun.
Made a video showing the texture technique on the scarier on Scrappy Jack. https://www.youtube.com/watch?v=E-5-ciPqluA
How I Designed This
Wanted to see if I could model a reasonable pumpkin using Onshape. Quite pleased how it came out.
Category: Decor