Snap-on Filament Filter/Oiler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dog hair, dust, and other small bits might get pushed through your extruder compromising, or completely wrecking a…
- Ocena
- 4,848 / 5
- Polubienia
- 190
- Pobrania
- 1505
- Wydruki
- 46
- Wyświetlenia
- 4311
- Oceny
- 33
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Dog hair, dust, and other small bits might get pushed through your extruder compromising, or completely wrecking a print. After designing a couple filters that were simple slotted cups, I wanted something a bit more refined and lightweight. So I modeled this. Has holes to drop in a bit of oil if need be.
Printed as one piece. Should hinge should be loose or break free with minimal force.
Timelapse: https://youtu.be/lVMvGldjXS0
If you this helps and want to encourage my insanity, buy a cup of coffee for me, a bag of coffee, or you pick the value. Thanks!
Print Settings
Printer:
i300 Pro
Rafts:
No
Supports:
No
Resolution:
0.16mm
Infill:
10%
Notes:
3 shells. I printed it in 3DXTech's Red ASA. Print two or more at a time to give the tab a bit more time to cool.
I cut two pieces from a kitchen sponge (NOT the cellulose kind) to fit the case. Add a drop or two of oil to help PLA. Not certain if it helps other types.
Timelapse of three at different layer heights.
How I Designed This ===================I used Onshape to model it, and then about five prints to get it dialed in.
Category: 3D Printing