Pinball Wizard foot pedal with ESP32 controller. Solid construction. Fußpedal. Funk Fußschalter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a foot pedal for esp32. You can use it for what ever you want. The pcb holder part is modular.you can disable it
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This ultra solid model is so stable, you can easy stand on it, and theoreticly you can use 1.75 mm filement
as axis/shaft. I recommend a metal stick, thats much better. you can drill the holes bigger, of your shaft does not match. dont forget to set wall thicknes to around 6 lines. i like it solid. i use top/bottom/walls 6-7.
the bottom plate is 180 degrees rotatable. (with spikes for carpets and without spikes for flat floors.)
dont poke the battery with the spikes(!!!!!) the screw holes are set asymetrical, to prevent false mounting.
maybe i will change the bottom plate in the future to one side clip, and only on one side screws.
but i have too much projects and not time. sharing costs more time then drawing the objects...
the PCB holder is a seperate objekt in the model. you can disable it in your slicers object manager. (orca for example), if you want to use a different esp32 module. maybe i can find the module i am using.
but we know, the modules are all the same, more or less. i gave my pcb a bit more place, to have
the possebillity to swap to an other esp32 pcb easy. in this case only the 2 gramm side panel cover must be changed for the usb hole.
you need 1 microswitches , 2x springs, 2x m3 screws, 2x ruthex and the power en sliding switch is in my amazon list, have no time to search, today. if you are interested, let me know. every parts is very common for 3d printing guys.
with the 2 screws you can adjust the hight of the moving part. i use it bare foot with my big uncle.
works very good, if you want it a bit more quiet, you can glue a bit paper or rubbery tape in the contact line, where the moving part has contact to the base. i did that, and it works pretty good.
Spring: 9mm diameter, and ~35mm long.
Screws: 3mm diameter, max 18mm long threat + head
Esp32: (give me time to search. its not neccessary. you have 29mm width. thats okay for most dev boards.
Switch: look on the last picture. dimensions: 28mm * 16mm * 10mm
power on/off switch: https://www.amazon.de/dp/B0F48PLY48 you need only one of the right (big) one.