Gate Catch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My back gate's latch is a bit wonky and the wind has taken its toll on it. Was using a bent coat hanger to secure it,…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 429
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My back gate's latch is a bit wonky and the wind has taken its toll on it. Was using a bent coat hanger to secure it, but knew I could do better. So I model and printed this. Maybe it will be an inspiration for you to make things that are useful to you.
Print Settings
Printer:
I300Pro
Rafts:
No
Supports:
No
Resolution:
0.26mm
Infill:
15%
Notes:
2 shells.
Trying out MakerGeek's Raptor high-temp PLA. We'll see how well it holds up to the elements. May redo eventually in PET.Post-Printing
Assembled with a M5x10 socket head screw and a M5 locknut.
How I Designed This
I used Onshape to model it. Added a wavy spring to give a little give and added inner spikes to hold the post strap in place.
If you want to dig through my Onshape file, you can check it out here: https://cad.onshape.com/documents/6b054dccb636c22229eda696/w/5b0a7acebc694616646d3f78/e/fa9617e5cc26ec3752e2ab7c
Category: Outdoor & Garden