1 / 2
Taller bottom section of box and insert for around 4cm thick stack of cards
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Increases capacity of previous design by expanding the height of the bottom portion of the container and insert.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 55
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed the original design for a relative who broke their original cardboard packaging for the game. I found that the variant they had had more cards than the original design would accommodate so I modified the design slightly to accommodate around 1cm additional thickness of cards. Sections highlighted in teal are areas where the model was stretched to increase capacity without altering function of lid and latches.