True Fruits Bottle Cap - Star Wars Rebellion (with TPU Seal)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Give your empty "True Fruits" smoothie bottles a new purpose with this custom screw cap.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Upcycled Storage: True Fruits Bottle Cap (Star Wars Rebellion Edition)
Turn your empty glass smoothie bottles into useful storage containers! This cap is designed specifically for "True Fruits" bottles and features the Star Wars Rebellion logo embedded into the top.
To ensure the bottle is completely leak-proof, this model utilizes a flexible TPU gasket. Since 3D printed TPU surfaces are rarely perfectly smooth, I have included a custom sanding jig to help you achieve a perfect seal.
Key Features:
Two-Part Design: Rigid threaded cap (PETG) + flexible gasket (TPU).
Leak-Proof System: Includes a printable tool to sand the gasket perfectly flat.
Multicolor Ready: The logo is flush with the surface but modeled as a distinct feature for easy painting in the slicer.
Grip Texture: Optional fuzzy skin settings can be applied for better handling.
Bill of Materials / Requirements:
Superglue (CA Glue) to assemble the sanding jig.
Sandpaper (Grit: 80, 120-150, and 600-1000).
⚙ Print Instructions:
Cap:
Material: PETG (Recommended for durability and food safety).
Infill: 20%.
Supports: Required for the threads.
Layer Height: 0.12mm or lower. A finer resolution minimizes deep layer lines, creating a smoother surface with fewer crevices for bacteria to harbor.
Important: Uncheck "Remove small overhangs" in your slicer to preserve thread details.
Gasket (Seal):
Material: TPU (Must be flexible).
Infill: 100% (for a solid, watertight seal).
Sanding Jig:
Print parts handle and disk in PLA or PETG (any rigid material).
🛡 Achieving a 100% Leak-Proof Seal (The Sanding Process):
For the cap to hold liquids securely, the TPU gasket must be perfectly flat. Printed top surfaces often have small ridges that let water through.
Assemble the Jig: Print the two parts of the sanding jig and glue them together using superglue (CA glue).
Insert Gasket: Place your printed TPU seal into the jig. It holds it securely in place.
Sand it Flat: Sand the surface of the gasket using the following progression:
Step 1: 80 Grit (Rough leveling)
Step 2: 120-150 Grit (Smoothing)
Step 3: 600-1000 Grit (Wet sanding recommended for the final finish)
Done: Once smooth, insert the gasket into the cap.
Note: Without this sanding process, the cap might leak due to the nature of FDM printing.
🎨 Aesthetic & Multicolor Tips:
Fuzzy Skin: For better grip, you can apply "Fuzzy Skin" to the outer vertical wall of the cylinder. Be careful not to apply it to the threads!
Multicolor Logo: The logo geometry is separated. Import the model into your slicer (Bambu Studio / PrusaSlicer) and use the "Fill" tool to color the Rebellion symbol in a contrasting color.
⚠ Food Safety Disclaimer Please be aware that while PETG is generally considered a food-safe material, the 3D printing process (FDM) creates micro-gaps between layers. These "layer lines" can harbor bacteria and are difficult to clean effectively. Additionally, standard brass nozzles may contain trace amounts of lead.
Cleaning: Hand wash with warm soapy water. Do not put in the dishwasher, as high heat may warp the printed part or the TPU seal.
Use at your own risk.