Spool holder for 2020 extrusion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My Kossel kit had an acrylic spool holder that broke when I caught the power cord on it. So I needed a replacement. I…
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 483
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
My Kossel kit had an acrylic spool holder that broke when I caught the power cord on it. So I needed a replacement. I modeled this in SketchUp.
For 1kg rolls of filament that are up to 70mm wide.
Snaps onto 2020 rail and mounts with an M3x12 screw and drop-in t nut.
Instructions
Printed with a 0.4mm nozzle at .3mm layer height. 20% fill with two perimeters. No supports. Very solid to hold kilo roll.
Needs one (1) M3x12 screw and an M3 drop-in t nut to mount in the 2020 extrusion.
Add the screw and the t nut before you snap it onto the rail. Twist up towards the screw hole to remove if you for get the add the mounting screw.
Category: 3D Printer Parts