1 / 3
2x 50g Superglue Bottle Holder for Ikea Skadis
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Will hold two bottles of superglue.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
Will hold two 50g bottles of cyanoacrylate glue. I made this for two bottles since I have glue in two different viscosity levels (liquid & gel). The bottles are 38mm in diameter and fit in there with .5mm of clearance around it. The openings for the bottles are 21mm deep.
If anyone is curious: the glue I am using is this one.
NOTE:
You will need two M2.5 Skadis T-Nuts by @6d6178 and two M2.5 DIN912 screws for mounting the holder.