86 modeli
A simple 1×1 Gridfinity Superglue holder made to store a 50gr bottle of Everbuild CYN50 Industrial Superglue but should work for any bottle of glue smaller than 38mm in diameter. Printing Nozzle size: 0.4mm or 0.6mm Layer Height: 0.30mm…
Superglue holder designed for small bottles, the bottle I am using have 35x24mm dimensions.
Storagebox for bottles of super glue, diameter of the holes is 31mm. There is a box for one bottle, or you can have a box for three of the bottles. The box for three bottles have two extra holes for needles that I always need to push the…
This little 1x1x3 Gridfinity bin can hold up to 8 tubes of 1g super glue. I specifically made it with these UHU tubes in mind, but I imagine it can fit other brands as well. The fit varies per tube, so sometimes they jiggle around a bit,…
Designed to be refillable with the super glue gel tubes from harbor freight. I found the best print orientation to be as pictured above. Lay the squeezer on its side and sink it into the build plate 9mm (Thickness is 18mm) then glue the…
This is a highly controllable superglue applicator inspired by the Loctite "Control" super glue applicator. This design can be used with any regular super glue tube. V2 is now optimized for 3D printing by filleting all the sharp corners.…
After bringing my beads to various cons and having people make kandi bracelets, I realized I needed a better way to help people superglue the knots so that they don't accidentally have their kandi fall apart. This seems to do the trick.…
I printed with .4mm nozzle with .2layer heights. I like tight tolerances and modeled accordingly so that the glue bottles won't fall out easily.
Superglue tubes are annoying as they quickly go solid. They can last longer if stored upright with the cap on tight. Since the bases don't lend themselves to being easily stored upright I used the gridfinity plugin for Fusion 360 to make…
This 1x1 Gridfinity module is 3u high. It holds four 3g tubes of superglue, two with the lid down and two with the lid up. Opened tubes should be stored lid up so they don't leak. This module is designed without any through-holes, so if a…
This part fits the Gridfinity system Gridfinity base sizes: 1x1x0,5
A holder that fits 2 bottles of Pattex superglue. 0.2 mm supports optional
can be printed without support
I spun up a quick model to colocate my favorite glues: Gorilla Glue Clear (my new favorite general purpose) Loctite gel superglue Loctite liquid superglue (Glue stick, accelerant, or what have you). The focus was the first two items, but…
Resizing of Miroslav K's excellent model, to fit an Everbuild 20g container, item 5029347900069 . FreeCAD users could adjust the fit using the included source model . Just edit Sketch001.
Wanted a holder for my Biltema superglue. Printed with PLA
Has your super glue ever spilled on your table because you didn't have a proper place to put it, where it wouldn't fall? This easy print tackles exactly this issue. It also has comfortable holes on it's sides for your fingers when you…
Works with the Loctite liquid (NEED SUPPORTS ON BOTTOM) **MAY HAVE TO MAKE ADJUSTMENTS** Length 3.61 CM - Width 2.1 CM
Added magnets - and adjusted the size to the original Gridfinity size (41.5 x 41.5)
I wanted to store a small packet of superglue in my backpack without worrying about it getting crushed. It fits a single-use packet using a snug friction-fit. Here is the glue I designed this case around:…
Gridfinity holder for x2 superglue tubes (0.14 fl oz). I have noticed some size variance within the tubes themselves, some may fit more snuggly than others. Link to the item: https://amzn.to/41Qxas6 Links provided may be affiliate links…
Made to hold common types of liquid SuperGlue bottles (with paintbrush application), this base will prevent the container from falling and spilling.
This Super Glue from Hornbach has been my favorite, mainly because it does not instantly dry out after a single use. Using it repeatedly has made the nozzle clogged and brittle though. Thus i created these replacement nozzles. Now it can…
A set of pliers and a key to losen a stuck superglue cap. Pliers inner diameter: 12.5mm. No supports needed. Set kleštiček a klíčku na uvolnění zalepeného víčka vteřinového lepidla. Vnitřní průměr kleštiček: 12,5mm. Podpěry netřeba.
Sekundenkleber für Kunststoff 25g - wasserfest, hitzebeständig & mit Nadel Verschluss
Simple holder for Loctite XXL Superglue (20g) As seen here: https://www.amazon.co.uk/dp/B07Q8N9ZVF Fits in very snugly, might even hold upside down if you'd rather have it that way. Fits into HSW insert.
A Simple Bin intended to hold up to four tubes of 3M Superglue. Easy, fast, and useful print. If you like the model post a make, and share any tips you have to help everyone else out.
Simple holder to store a “Kraftprotz” superglue bottle. Specific superglue: https://amzn.eu/d/fruOrak or https://www.3djake.at/arka/arka-kraftprotz-superglue
Great tool for the work bench easy to print. Video link https://youtu.be/0iX3dObx8rU Purchase link https://teleportpod.com/portal/17ef0064-a8d9-4a06-9aa2-6bfa728948c5?item=1219 Print Settings Printer Brand: Creality Printer: Ender 3 Pro…
My last superglue bottles were all discarded because they were not stored properly. I recently switched to Gridfinity and designed this holder for the superglue. This holder fits 3 bottles of 20g. Slots for the bottles are 25mm deep.
I kept knocking over the glue box, so here is a stand for it. Printed in vase mode 0.6mm bottom and 0.6mm extrusion width.
After a great sugestion I combined two models and added som extra holders for small accessories.
Locktite Superglue has a really nice bottle that doesn't seem to clog up. But it does like to fill with air and make it hard to squeeze the glue out of. Because of this I tend to balance it upside down so it can drain, but it falls…
Dies ist ein kleiner Halter für die Top2Glue (Sekundenkleber und Granulat) Flaschen der Firma Langlauf Schuhbedarf. Ich bewahre den Kleber in der Kühlschranktür auf, die 20g Fläschchen bleiben so an ihrem Platz. Die Halter haben einen…
Druck ohne Support und Rand möglich
Made a simple two finger pull you can glue onto your superglue lids to make it easier to yank them off when they inadvertently get glued on… Bob Smith Industries Insta-cure Cyanoacrylate Enjoy!
Holds 7 Mini-Superglue (Harbor Freight “Future Glue”) tubes. Tubes are ¾" wide and 2" tall (0.03oz / 1g).
Simple holder for standard line of Bob Smith superglues for the hexagon storage wall (HSW).
If you ever used the small 3 gram superglue tubes, you know it can be messy and painfull to use. This is an attempt to reduce the pain. This design went though at least 8 iterations before I called it done. I packed it features I thought…
You can print without infill. Revision 1 2023-08-06: Added 1mm diameter, 28mm deep pinhole to store a pin for when you need to unclog the tip.
This holds 3 Bob Smith Industries 1/2Oz Superglue bottles and 1 2Oz activator spray bottle in a 1x3 Gridfinity bin About Gridfinity: Gridfinity System from Zack Freedman: https://thangs.com/designer/ZackFreedman License: CC BY-NC-SA 4.0…
A simple 30.5mm diameter hole with a 1mm bevel in a 1x1 Gridfinity Refined block.. suitable for a hole load of uses, but designed to hold a standard superglue bottle or a JT16 glue stick. I kept it a fairly loose fit so there was no…
Holder for 3 glue bottles (30.50mm) and activator spray (53mm)
1x1 bin with a cutout that's just the right size to keep me from knocking over that !@#$ bottle all the time :). bin is 2u high and has slots for magnets. Print with extra solid bottom layers to make it more bottom heavy/more stable.
A simple holder for Biltemas Art. 36-4831 superglue with activator I've made it for multiboard, but since it's standard multiconnect, it should work with HSW and Ikea Skadis too, with the right snaps 0.2 Layer Height No support 3 walls…
This is a drawer organizer to help keep my magnets, decal solutions, Badger air brush oil and extra superglue sorted. These are all things that I use for Warhammer 40k. The brands that it is sized to fit are easily seen in the picture. It…
SuperGlue Holder - can be mounted directly to a wall or attached to other wall systems w/attachments (french cleat, multiboard, honeycomb). Please NOTE that it is slotted for the smaller CA glue set - bottle (.8oz) & activator (3.3 oz).
This is a quick model that will old any bottles that are up to 40mm in diameter. It was designed Zap a Gap and Zip Kicker specifically. It uses the Universal Peg Board system for mounting.
I made this little holder as I was fed up with my glue clogging up the nozzle. Then I improved it by making it compatible with Gridfinity. Both models are included here.
I created a holder for the Everglue set for the skadis wall. It includes the activator 200ml and three bottles superglue. Support is required for the hooks. Print settings: Infill: 15% gyroid Layer height: 0,2 mm Filament: Prusament PETG
Will hold two 50g bottles of cyanoacrylate glue. I made this for two bottles since I have glue in two different viscosity levels (liquid & gel). The bottles are 38mm in diameter and fit in there with .5mm of clearance around it. The…
Super glue holder for SKADIS pegboard with honeycomb texture. Bottle size: 43x22.5mm Use supports only for the two pegs. I used manual tree. Feel free to ignore slicer if it wants to put support around any of the honeycomb areas.
Küpper EU pegboard superglue holder for 38mm bottles. Print Settings Printer: Flsun SR Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: GST3D PLA+ Black Post-Printing ============= Category: Tool Holders & Boxes
I simply closed the hole in the center (i couldnt fit a long enough screw through it anyway) and added a chamfer for SUPPORTLESS printing. This part is a remix from the Bird Temple by JobSmolders: Bird Temple by JobSmolders
While looking to design something new in Fusion 360, I notice I had serval bottles of brush on type superglue. I created a simple holder to hold two bottles each of the brush on Loctite brand superglue (5g) and the brush and nozzle type…
Easy printable superglue and activator stand. 0.2-0.25 mm layer height with PLA works great. You can easily change the parameters in the .3mf file, for different size containers.
Small bracket / holder in PLA for Superglue tubes (3ml). ~1 hr to print. Example printed in Polyalchemy Elixir Bronze 6mm hole in rear for screw mounting. Double sided tape would also work. Enjoy. Ps. If you print it and like it. PLEASE…
It is well known that after you open superglue, the best position to store it afterwards is the vertical one. I've create this for my own need and willing to share to others. You can scale this model to fit your needs even for bigger…
Print settings: Spiral vase mode 0.8mm wall thickness (standard 0.4mm nozzle) Single wall Original design file here if you want to modify:…
This cable clip was designed to perfectly fit the SuperGlue brand Pre-Cut Foam Mounting strips you can find at Dollar Tree. They're sturdy, quick to print, and require no supports. Also works great as a plant guide/clip! Print on it's…
A simple 1 bin glue holder to keep the glue from geting knocked down so easily. Made In FreeCAD's Gridfinity WB.
This is a holder for 2 bottle of superglue. It is based on the "Pegboard Tool Mount System" by eric-anastas. You can get the proper hooks for your pegboard from his design. It is sized for the Loctite brand "Ultra Liquid Control" 4g…
Simpel feet for Biltema Superglue bottle so it dosen't fall. You don't have to be worried that the open bottle is going to fall and mess up your creative space.
Simple Stand for Creative Superglue container. Instructions said to store upright, but it has a curved base :-}
Superglue base station organizer. I like to get every penny's worth, so instead of relying solely on luck to keep the bottle upside down as it starts to reach empty, I made this so squeeze out every drop I can! One side has 2 Gorilla glue…
Gridfinity for the 2oz bottle of starbond superglue and it's accessories
A little essential to keep those tidy.
For new multiboard users like me that 3d prind and use glue…i think it will be usefull
Superglue is wonderful to have all the time. But it's frustrating when it gets punctured and spills everywhere.
This is a modified body for the Superglue applicator created by awes on Maker World. That one is a snap fit, where this print uses eight 5mm x 2mm magnets to hold the body together. To achieve this, modifications were made, along with…
I store my superglue (cyanoacrylate) bottles in the fridge, because it's supposed to extend the life, however they keep falling over. This is a simple rack to keep them upright. It's intended for "Everbuild" 20g bottles, from Toolstation,…
Printed in PETG on A1 Mini 10mm and 5mm holes for screws and screw driver
Replacement for the bottom and spacer feet of the MK5 plastruder. http://wiki.makerbot.com/thingomatic-doc:plastruder-mk5-build-instructions#toc39 http://wiki.makerbot.com/thingomatic-doc:plastruder-mk5-build-instructions#toc44 Update: As…
Holds two Starbond glue bottles (36mm), an accelerator (53mm) and some small nozzles (5.25mm). Used the remix pieces and added a lower shelf. I printed it on a Mini+ right-side up and added minimal supports to the back portion.
Printed out of PLA, no supports, 15% infill, .25 Speed profile on a C1+.
Use a handy web tool to generate a replacement nozzle and cap for your superglue bottle: https://gustebeast.github.io/superglue-cap/ The attached model is an example for my 0.7oz Loctite brand superglue. Source code here:…
Once you find the UV-superglue and search for the UV-lamp - and vice versa? Now everything is together! Indicating plate is separately printed, here in English or German. A blank version is also attached, for your own text-adventure in…
Tired of typing your glue over? I made this to prevent my C.A. glue tipping over on my workspace. I also made a quick gridfinity tray to hold the extra caps and stuff.
Super glue holder for SKADIS pegboard with honeycomb texture. Bottle size: 43x22.5mm Use supports only for the two pegs. I used manual tree. Feel free to ignore slicer if it wants to put support around any of the honeycomb areas.
This holds 3 Bob Smith Industries 1/2Oz Superglue bottles and 1 2Oz activator spray bottle in a 1x3 Gridfinity bin About Gridfinity: Gridfinity System from Zack Freedman: https://thangs.com/designer/ZackFreedman License: CC BY-NC-SA 4.0…
I store my superglue (cyanoacrylate) bottles in the fridge, because it's supposed to extend the life, however they keep falling over. This is a simple rack to keep them upright. It's intended for "Everbuild" 20g bottles, from Toolstation,…
Printed in PETG on A1 Mini 10mm and 5mm holes for screws and screw driver
I always store my superglue vertically with the nozzle up. That seems to extend the life of the tube and the glue is not likely to dry out in the nozzle after each use. This model provides a convenient stand that holds the tube upright. I…
3-slot holder for tubes of superglue Slots dimensions: 25x20x60 mm, 20x20x50 mm, 20x20x40 mm
Gridfinity bin created to hold an opened Dollar Tree superglue epoxy upright to prevent leaks with a space for an extra glue. I use the dollar tree epoxy for model making and sometimes the caps will leak if it lays on its side. This bin…
