Ablage für Sekundenkleber/ Tray for superglue
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
2,26 € – 2,76 € netto (bez VAT)
Dla pliku: Sortierer_0.4n_0.2mm_PETG_MK3S_2h43m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 2,51 € netto (środek widełek).
- Masa podana przez autora
- 29 g
- Czas druku podany przez autora
- 2,72 godz.
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Ordnungssystem für Sekundenkleber/ Organising system for superglue
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 217
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Dies ist ein kleiner Halter für die Top2Glue (Sekundenkleber und Granulat) Flaschen der Firma Langlauf Schuhbedarf. Ich bewahre den Kleber in der Kühlschranktür auf, die 20g Fläschchen bleiben so an ihrem Platz. Die Halter haben einen Durchmesser von 31,9 mm und eine Höhe von 35 mm. Die Außenmaße betragen 69 x 69 mm.
Als Infill wurde Lightning 15% verwendet, da das Modell nicht besonders beansprucht wird.
Translation: DeepL
This is a small holder for the Top2Glue (superglue and granules) bottles from Langlauf Schuhbedarf. I keep the glue in the fridge door, so the 20g bottles stay in place. The holders have a diameter of 31.9 mm and a height of 35 mm. The outer dimensions are 69 x 69 mm.
Lightning 15% was used as infill, as the model is not particularly stressed.