Drill Bit Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drill Bit Holder
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a bit holder that attaches to the drill using the included screws. This bit holder is designed for the Steinhaus ONE 18V PRO-ONE-CDH2 drill with a 4AH battery. The magnets are not absolutely necessary but can help secure the bits, if you decide to use them their size is 8x4x1.7mm and they are designed to be attached with glue (I used Super Glue).
I recommend printing it from PETG/ABS/ASA because the battery and trigger area heat up during operation, as settings I used 3wall with 15% infill, 5 top and bottom at a resolution of 0.2mm without supports.
I have attached 2 versions, one for the left and the other for the right.