Manual paint mixer ( Vallejo / Army painter )
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Paint mixer ( vallejo /army painter )
- Ocena
- 0 / 5
- Polubienia
- 49
- Pobrania
- 154
- Wydruki
- 0
- Wyświetlenia
- 921
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Compact 3D-Printable paint mixer designed for hobby acrylic paints.
It securely fits Vallejo 17ml and Army Painter 18ml bottles. There are 2 versions of paint holder. For one or two bottles. Do not use both versions simultaneously, they won't fit.
Mixer has about 1:4.5 gear ratio on the "big axis" and around 1:8 on the "small axis".
TIPS:
A drop of thin lubricant (i used sewing machine oil) on the gears makes the machine run much more smoothly.
After printing, i recommend to rotate the gears without any paint bottles to loosen the mechanism, as print seams may initially block smooth movement.
Printed with 0.2 layer height.
Assembly tips:
Start by assembling the front gears and back gears, then slide them into the cover.
The front gear assembly may be the most challenging. Begin by placing gears [8/9 and 10] into ring [11], then install the assembly onto carrier [2].
