RIGOL Probe 10x Lock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple clip that blockes accidentally switches to 1x to prevent damage.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 1
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Probe 10× Lock – Prevent Accidental 1× Switching
This small clip locks a standard passive oscilloscope probe in 10× mode, preventing accidental switching to 1× during measurements.
Accidentally bumping the attenuation switch is easy to do, especially when repositioning probes or working in tight setups. When measuring signals near the maximum voltage rating of the probe or scope input, an unintended switch to 1× can instantly exceed safe limits and potentially cause probe or oscilloscope damage.
By physically locking the probe in 10×:
You eliminate accidental overvoltage caused by a hidden 1× switch
You avoid confusion when signals suddenly appear 10× higher than expected
You maintain consistent attenuation, bandwidth, and loading
You gain peace of mind when working close to voltage limits
This is a simple, low-profile, non-destructive solution that improves measurement safety, repeatability, and ease of use, especially in high-frequency, switching, or resonant circuits.
Designed to be easy to print and easy to install. No tools, no modification to the probe.