Liczymy pasujące modele…
After playing The Witcher 3: The Wild Hunt, I had to print a memorable piece from the game. It's not 100% accurate as in the game, but it comes close. Printed in PLA Prusa Galaxy Black. Printing Difficulty: I I : Novice printing knowledge…
🐶 Un compagnon à ressort irrésistible venu tout droit d’un coffre à jouets ! Avec ses yeux malicieux, son corps souple en spirale et son style fidèle au célèbre personnage, ce chien est une pièce culte à avoir. Idéal pour les fans…
🦖 Rex, le dinosaure le plus gentil de Toy Story, débarque en 3D ! Avec son grand sourire, ses petites pattes et sa démarche maladroite, cette figurine stylisée de Rex est parfaite pour ravir les fans de Pixar. Il est prêt à rejoindre vos…
I have uploaded Revision 2. The first model is the yellow one in the photographs. Revision 2 is the red one in the photographs. It has additional structures to place the oscilloscope probe tools.
A travel cover for Rigol DHO8xx series of oscilloscopes. Designed-in support allow printing on any printer with a build volume ≥ 250mm x 250mm x 210mm, i.e. MK3S, Bambu X1C, P1S, etc. Many thanks to Slant 3D for the support tip that…
Ce modèle représente un chat drôle et expressif , dont la posture ou les pattes servent à maintenir un smartphone en position. Parfait pour ajouter une touche de fantaisie à votre bureau ou table de chevet. Impression : Adaptée pour les…
This custom-designed probe holder is made specifically for my Rigol DHO804 oscilloscope. It should work with any DHO800 series scope and possibly DHO900 series (need to verify). It provides a secure and convenient storage solution for…
The Witcher - Triss Merigold
Rigol MSO5000 PLA2216 Custom 16 Channel Logic Probe Case This is case suitable for third-party logic probe. The case itself is split in two parts, both top and bottom. It is held together with 4x M3x6 screws. Recommended print settings:…
Replacement knob for broken one on Rigol oscilloscope. 6mm shaft. Printed in white filament PM. Print instructions: Layer height 0,1mm, no supports.
This is an adapter for putting a 60 mm fan into your trusty Rigol DS1054Z oscilloscope inspired by https://www.prusaprinters.org/prints/10300-rigol-ds1054z-converter-for-60mm-fans . I'm using a Noctua NF-A6x25 FLX with their low noise…
Printed in PETG Printed on its Side Uses #4 Screws to mount
I have a Rigol DHO914 Oscilloscope and I find the fan noise annoying so I designed a rear mounted adapter to mount a larger fan, using the VESA mount screws on the rear of the scope. I used a Noctua slim (15mm) 92mm fan NF-A9x14 PWM but…
This is the amulet of Triss Merigold from the first witcher game
Since the original front cover for the oscilloscope is quite pricey, I designed and printed one myself. To save material, I just designed a frame to hold a 5mm thickness plate of a light but sturdy material, e.g. hard foam material or…
To avoid that metallic objects touch the connector, I designed a small lid to stick in place of the LA connector when not in use. I used PLA to print the thing, but PETG is probably better due to more springy behaviour. No support is…
When replacing the original 80mm fan in the Rigol MSO5000 with a low noise Noctua NF-A9 fan, you will need a new holder to fit the bigger 90mm fan that has about the same air flow as the built-in fan but is quite a bit less noisy. I…
A holder for the USB-C power brick of a Rigol DHO800/900 series or DB858(E) device to attach to the VESA mount on the back to clean up the wiring. The power brick and its USB-C cable are attached with cable ties… … and then the holder can…
just a Remix to fit the Rigol PVP3150 Probe
This stand is a pair of parts (right and left) that snap into place on the bottom of the DHO800/900 oscilloscope to raise it about 4 inches and tip it back to make it easier to view. No screws or spacers needed, it clips firmly into place…
These are some short feet for a Rigol DS1054z (or any, I'm guessing, in the 1054 family). I had been using some taller feet that were great, but the extra height got in the way of my tool storage wall behind it. These slip on easily over…
Źródło oznaczyło ten model jako treść 18+.
(English below) @vogon hat ein nützliches Modell einer Halterung für die Messspitzen der Oszilloskop-Serien Rigol DHO800/900 (S) entworfen. Mir war die Platzierung am Arbeitsplatz jedoch zu unflexibel, weshalb ich mit Zuhilfenahme eines…
This probe tray is designed to store the probes of the Rigol 1054Z, Just because I didn't like the bags provided. The trays are stackable and comes with a lit for the one on the top. Category: Tool Holders & Boxes
Rigol DHO 800/900 Abdeckkappe hinten Jede Kappe kann separat weggeklappt werden. Filament: TPU PLA oder PETG geht nicht, da das Teil beim einsetzen gebogen wird. polymaker polyflex 95a
This thing allows you to mount a 60mm fan inside the DS1054Z. I used a Noiseblocker PR-2. Now it is silent. One edge needs to be removed. Otherwise the fan pushes against a pin header on the main PCB. Print instructions Category:…
Oscilloscope probe to wire adapter For Rigol probes (PVP2150, DS1054Z) This allows for a soldered probe connection with minimized lead inductance. Heavily inspired by https://www.thingiverse.com/thing:4935122 Oscilloscope Probe to Wire…
🐴 Un fidèle destrier assis, prêt pour de folles aventures ! Ce cheval à l’allure comique, inspiré d’un célèbre compagnon de cow-boy, est un modèle parfait pour les fans de dessins animés. Assis dans une position détendue avec ses grands…
A knobby knob.
The new Rigol DHO800 and DHO900 series is great, especially because it can be mounted on a VESA mount. Unfortunately, this also means that the cables are often suspended without support. This provides support for all the cables, including…
This covers over the logic analyzer (LA) connector on the front of a RIGOL DHO900 oscilloscope to protect the pins. Tolerance is close. If needed for snugness, increase the length a little in your slicer. 12/21/2023: Added A TPU version…
I got a new oscilloscope recently and mounted it to a monitor arm on my desk and wanted something to hold the probes out of the way. I tried using NullSense's probe holder part and found that the probe holders themselves were great, but…
Rigol DHO 800/900 Abdeckkappe front Die USB Kappe kann separat weggeklappt werden. Filament: TPU polymaker polyflex 95a PLA oder PETG geht nicht, da das Teil beim einsetzen gebogen wird.
******* PCB for USB A plug temporarily removed due to an error ******* This is an enclosure for a 3 port USB extension hub to fit to a RIGOL DHO800/900 series Oscilloscope allowing three devices to be used with the single USB port whilst…
Description This is a slim mount for a 92mm fan on the back of your Rigol DHO800/900-series oscilloscope. It reduces the noise compared to the internal fan significantly and even lowers the temperatures by a few degrees. This made a huge…
This is a universal probe holder for the RIGOL PVP3150 passive probes that come with the DHO800 / DHO900 series oscilloscopes. The probes are held securely in place with a satisfying snap. Other probes with a diameter of around 10.5 mm…
The adapter helps improve airflow and device cooling under prolonged use or high ambient temperature. Designed to be installed without modifying the oscilloscope — it uses existing screw points and aligns with the stock vent grid. Fan…
Simple probe holder for 2 probes (DS1052) just glue to the side of your scope This probably won't work if you still have the yellow tips at the end of the probes, you will need to modify it to make holes bigger
These are probe holders for Rigol RM-DS1000Z rack kit. 4x M4x12 or M4x14 countersunk screws are needed for mounting. Designed for RP2200 probes.
Rack mount for the Rigol MSO1074Z oscilloscope - should fit other models from 1000Z series too like DS1xxx, MSO1xxx (check your model's dimensions). Official rack mount kit is quite expensive (around 250€) so I made this one. It also…
Simple print, these two brackets give the scope a slight downwards angle so that it can be mounted higher up (I have mine over my monitor). The scope clicks into these brackets and is very firmly held in place. Let me know if you like…
I got a new Rigol ds1054z scope that came with Rigol PVP2150 probes (the smaller, all black kind), and I needed something to hold the probes in place on circuit boards. I had already printed this very nice probing station designed by…
This system helps keep the Rigol Oscilloscope in place on the shelf when you either touch buttons or attach/detach the oscilloscope probes You need to print: A: 2xRigol frame B: 2xFrame_stopper C: 1xArm_NEW D: 1xBack suspender Screews…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
4.3U 19 inch rack front panel mount for Rigol DHO800/DHO900 oscilloscopes These panel mounts require the DAP 2U MP-1 bracket. This bracket must be cut in half, with the two halves moved 4.3U apart. Print the two halves of the front panel…
Ce petit dinosaure trapu est un concentré de mignonnerie et de bonne humeur. Sa posture stable et ses membres texturés en font une pièce idéale pour les impressions en FDM, même à basse résolution. Il n’attend plus qu’un bon coup de…
This is a holder for the two probes for the Rigol Desk Multimeter DM3058 and others. I printed it in white PETG and laying on the side with support (for the clips)
This model is a VESA spacer/adapter designed to be placed between an oscilloscope and a VESA mount plate . Its primary purpose is to restore free airflow around the rear ventilation and fan area , which can otherwise be partially or fully…
This Marigold Skull Tower Vase is a bold and eye-catching decorative piece that combines gothic charm with festive Day of the Dead style. Designed with a stack of detailed white skulls accented by bright marigold flowers, it works…
We used Slicer Goodies on here to make the lettering and not sure where we got the blank plant label from. Hope every one likes it. Look at all the other plant labels in our collection.
My Rigol DL3021 works fantastic but, as with most electronic loads, the input lacks diversity. There are times I need to test a small load and do not require heavy gauge wire to be connected to the DUT. Its a pain, at least for me, to…
Simple labels for labeling the outputs of the three channels of the Rigol DP832 power supply. OpenSource code supplied. Some adjustments may be necessary to achieve a snug fit, depending on the 3D printer used. Printed with Prusa MK3S,…
I recently broke the handle on my Rigol Dm3058E multi meter. The handle itself is actually fine but there are 2 keys on each side of the handle that go inside set holes on the equipment to lock it in a certain position. To fix the problem…
Anti-explosion technology! A simple model to protect the SHORT button of the Rigol DL3021A and similar DC electronic loads against accidental activation. This part also fits the ON/OFF button too, if you want to use it there as well.…
This is an enclosure for the knockoff RIGOL logic analyzer sold on eBay: https://www.ebay.com/itm/224648789536 There are 2 parts - after printing they are to be glued together. I printed them with PLA and glued them with Krazy Glue…
This model is a VESA spacer/adapter designed to be placed between an oscilloscope and a VESA mount plate . This is modified version of this model . Both models have the same mounts VESA75->VESA100 and look similar, but I tried add more…
I needed a place to put probe that works with multiboard but din't exist so made my own
Unofficial dimensional reference model for the Rigol RP3500A oscilloscope probe. This is intended for designing holders, trays, Gridfinity inserts, scope accessories, and other bench tooling around the RP3500A probe. This is a…
Rigol RP3500A probe holder for ERGO-FLEXI-FIX Stick the probe in here and zip tie or twist tie it down. Source Source files are available on Github .
This custom-designed probe holder is made specifically for my Rigol DHO804 oscilloscope. It should work with any DHO800 series scope and possibly DHO900 series (need to verify). It provides a secure and convenient storage solution for…
This is a holder for the two probes for the Rigol Desk Multimeter DM3058 and others. I printed it in white PETG and laying on the side with support (for the clips)
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
I needed a place to put probe that works with multiboard but din't exist so made my own
This is a universal probe holder for the RIGOL PVP3150 passive probes that come with the DHO800 / DHO900 series oscilloscopes. The probes are held securely in place with a satisfying snap. Other probes with a diameter of around 10.5 mm…
This model is a VESA spacer/adapter designed to be placed between an oscilloscope and a VESA mount plate . This is modified version of this model . Both models have the same mounts VESA75->VESA100 and look similar, but I tried add more…
This is the amulet of Triss Merigold from the first witcher game
This simple clip holds your Rigol scope from sliding backwards on a shelf. I know this is simple but it works great. PLA, no supports.
designed to grip a desk 35-40mm thick, with a mouse mat on the top surface and no give on the bottom (my desk is clad in stainless steel), and hold about 5-10 pounds. no guarantees for any other types or thicknesses of desk, nor anything…
This is a stand for the Rigol DS1052E which is a snug fit to the base which lifts it off your desk and adds storage underneath it. This is a large print and will not fit on normal sized printers, e.g. MK4S/Bambu printers. It fits on a…
Nothing that i found was quite right for my needs so i designed these Covers for the Rigol DHO804. They sit tight on my end so if your tolerances are slightly off it could be either too lose or tight. Changing the Model Size by 1-2%…
This bracket allows 2 Rigol devices to share a single VESA100 articulating mount to save desk space. The handle on the right side allows everything to be moved into and out of your work area with ease. The device on the bottom requires…
Under shelf holders for rigol 1000-series oscilloscope, printed standing up with tree support for screw holes
Trying to add an additional cooling fan to the RIGOL Oscilloscope and a VESA mounting plate for the workshop. Both of these sandwich together and requires 4 - M4x60mm bolts. The cone piece provides space for airflow and the VESA…
On the back of my electronics workbench I have a couple of IKEA Skadis board to mount my tools to. These are the brackets I used to mount my Rigol DS1054Z oscilloscope. Note that these brackets are actually a mirror of each other. It is…
Stand for the Rigol PLA2216 Logic Analyzer Optimized airflow position for effective cooling Printed with PETG Layer: 0,2mm Infill 15%, Gyroid No Support
Probe 10× Lock – Prevent Accidental 1× Switching This small clip locks a standard passive oscilloscope probe in 10× mode , preventing accidental switching to 1× during measurements. Accidentally bumping the attenuation switch is easy to…
Wall arm mainly for Rigol DHO800/900 but you can use it to hang whatever you need with vesa 100x100. You need just 4 bearings 608 and 2 screws M3.
Rigol DP832A-Compatible Replacement Knob This is a knob designed similar to the OEM knob found on the Rigol DP832A. It's not exact, but it's close enough that if you're looking for a replacement (because yours is maybe damaged or…
remixed to hold a lipo battery. Thanks Yanick Deguise for sharing the files! Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Infill: 25 Filament: 123-3d PLA white Category: Parts
Did the foot on your Rigol 1054Z oscilloscope break? Print a new one and fit it in minutes. This print is a bit "sloppier" than the original but it's close enough to lock in place. Print instructions Print this at 0.05mm layer height…
This is a remix of Devon Goldstone's Rigol DS1104 wall mount brackets. See the attached quick&dirty OpenSCAD file, if you dare ;)
Riser feet to tilt display upward for easier viewing when power supply is on desktop rather than an eye-level shelf. Wide base for stability. Sketchup design file included. Edited Mar-3-2020: Added shorter version. Category: Electronics
Well not really mo own model, because the graphic comes from a game. So it is rather low in polygons. But I wanted a bust from this beautiful Witcher character. I printed it with organic support myself. For those of you with a Prusa MK3,…
Rigol DS1054Z scope wall mount Remix of Rigol DS1xx4Z scope wall mount bracket" by Masterkookus thinner less material reduced print time Print Settings Printer: Multec Multirap 420 2Move Rafts: No Supports: No Resolution: 0.2 Infill: 25…
Replacement foot for Rigol DS1000Z series oscilloscopes (ds1054z, ds1074z, ds1104z). The angles, dimensions and the flappy action are similar enough to the original feet, so you can just replace one of them. I also used a 2mm steel axle…
This is a VESA mount adapter for the Rigol MSO5000 series Oscilloscope. Mounting the scope above your work surface increases flexibility, frees up space, and puts the scope at eye-level. Tool-less mounting of the oscilloscope,…
mount your Rigol Oszi to a Wall. Attention, a 90° power plug is needed. Print Settings Printer Brand: Prusa Printer: Mk2.5s Rafts: Yes Supports: Yes Resolution: 200 Infill: 20 Filament: 3dJake PLA Black Category: Engineering
This adapter can be used with fans having a body diameter of 21mm or less. To use it, cut the fan from the frame, trim the existing supports back to the body, then glue the body into the printed part with a dab of superglue (or your…
I have a Rigol DHO4204 scope, and it would be lovely if it did not occupy space on my desk. Luckily, I also have a 3D printer! On the back, it has slots for mounting a battery that Rigol could never be bothered to sell, but in a…
