1 / 2
Rigol MSO5000 Fan Holder for Noctua Fan — zdjęcie 1
1 / 2

Rigol MSO5000 Fan Holder for Noctua Fan

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

When replacing the original 80mm fan in the Rigol MSO5000 with a low noise Noctua NF-A9 fan, you will need a new holder.

Ocena
0 / 5
Polubienia
9
Pobrania
86
Wydruki
1
Wyświetlenia
1010
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial

When replacing the original 80mm fan in the Rigol MSO5000 with a low noise Noctua NF-A9 fan, you will need a new holder to fit the bigger 90mm fan that has about the same air flow as the built-in fan but is quite a bit less noisy.

I printed the holder in PETG to make sure it will not change it's form due to hot air or car temperatures in the summer. You will need support, which I could not avoid.

I removed the original 80mm fan holder and used 4 M3x8mm screws and self-locking nuts to avoid any screws falling off due to vibrations. You could also use Loctite or nail polish, but make sure that the screws will not come off! The fan is held by the rubber thingies that are delivered with it.

Tagi