Rigol DS1052E Stand With Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Save some space on your desk with this custom stand.
- Ocena
- 0 / 5
- Polubienia
- 2
- Wydruki
- 0
- Wyświetlenia
- 180
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Standard Digital File License
This is a stand for the Rigol DS1052E which is a snug fit to the base which lifts it off your desk and adds storage underneath it. This is a large print and will not fit on normal sized printers, e.g. MK4S/Bambu printers. It fits on a Prusa XL and other similarly sized printers.
This was produced via a scan with the Revopoint MetroX and reverse engineered in Quicksurface Pro, hence this is a premium model available via my Printables club membership (cheapest) or a buy-once purchase in the Printables store.
You will need the following to complete the build:
- Two M3 inserts (CNC Kitchen or Ruthex are the right size)
- Two M3x8 screws and washers
The inserts should be installed into the knobs, which are then attached to the drawers through the holes. My print used PETG-CF with a PLA support interface, which worked perfectly in the supplied Prusa XL configured file.
This is a multi-plate print to speed up the job if you are using different colours and requires PrusaSlicer 2.9.0 or newer which has just been released at the time of publishing.