Rigol DS1052E Stand With Storage
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Save some space on your desk with this custom stand.
- Rating
- 0 / 5
- Likes
- 2
- Makes
- 0
- Views
- 180
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Standard Digital File License
This is a stand for the Rigol DS1052E which is a snug fit to the base which lifts it off your desk and adds storage underneath it. This is a large print and will not fit on normal sized printers, e.g. MK4S/Bambu printers. It fits on a Prusa XL and other similarly sized printers.
This was produced via a scan with the Revopoint MetroX and reverse engineered in Quicksurface Pro, hence this is a premium model available via my Printables club membership (cheapest) or a buy-once purchase in the Printables store.
You will need the following to complete the build:
- Two M3 inserts (CNC Kitchen or Ruthex are the right size)
- Two M3x8 screws and washers
The inserts should be installed into the knobs, which are then attached to the drawers through the holes. My print used PETG-CF with a PLA support interface, which worked perfectly in the supplied Prusa XL configured file.
This is a multi-plate print to speed up the job if you are using different colours and requires PrusaSlicer 2.9.0 or newer which has just been released at the time of publishing.