1 / 5
Rigol DS1054Z 60 mm Fan Adapter for Rubber Mounts — zdjęcie 1
1 / 5

Rigol DS1054Z 60 mm Fan Adapter for Rubber Mounts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is an adapter for putting a 60 mm fan into your trusty Rigol DS1054Z oscilloscope inspired by…

Ocena
0 / 5
Polubienia
9
Pobrania
116
Wydruki
0
Wyświetlenia
1030
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

This is an adapter for putting a 60 mm fan into your trusty Rigol DS1054Z oscilloscope inspired by https://www.prusaprinters.org/prints/10300-rigol-ds1054z-converter-for-60mm-fans.

I'm using a Noctua NF-A6x25 FLX with their low noise adapter NA-RC10 (58 Ω series resistor) maintaining an equal airflow as the original fan but way more silent. I also removed the original fan grill from the metal case.

The fan will collide with a header on the main PCB, so you have to cut off a corner (the one towards the top of the instrument, I cut the other one in an error first).

Print instructions

I printed my adapter with four contour lines and 25 percent infill.

Tagi