Harbor Freight 1/2" pipe clamp cover current model (2020-ish)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pipe clamp covers for a Harbor Freight 1/2" pipe clamp from about 2020.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
These covers should be printed in TPU, and are designed for a Harbor Freight 1/2" pipe clamp from about 2020. I added the link to the current HF 1/2" pipe clamp below. I coded these in openscad, some of my first, so they could be better. I did have claude.ai clean-up and comment the code for better usability. The "newer" HF pipe clamps have a nicer hand crank on top of the screw, as seen in the picture and the older ones may have been made in Japan. I've posted for the older model also, so you can compare.
Current HF 1/2" pipe clamp:
https://www.harborfreight.com/1-2-half-inch-pipe-clamp-3813.html
Older Model: