NEMA23 Motorcover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Since I hate crimping fine JST connectors and dislike soldering connections I made a cover including Phoenix Connectors
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my solution to extend Motorcables including phoenix connectors and a Cable strain relieve.
You need:
1x Cable gland M16 (2x if you use the "2 Outlet cover" Variant)
1x Phoenix connector ( the cover fits up to 2x 4-Phoenix Connectors) You find it on Ebay, Amazon, etc. just search for "Phoenix Type Connector 4-Pole"
2x M3x20+ Screw
To mount it to the back of the Motor I recommend diagonal mounting. Either short the long screws that hold the motor together or remove 2. Whichever you feel most comfortable with.
I will improve the design since i want the cover parts to lock into each other to transfer stress better from the cover plate and maybe improve the sealing surface.