H0 Contact Line Mast for 1:87 Model Railways
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 3D-printable overhead line mast designed for H0 scale (1:87). The contact wire is positioned approximately 68
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 137
- Wydruki
- 0
- Wyświetlenia
- 409
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
H0 Contact Line Mast for 1:87 Model Railways
use 0.5mm metal wire as overhead line
This is a 3D-printable overhead line mast designed for H0 scale (1:87).
The contact wire is positioned approximately 68 mm above track level, which corresponds well to typical H0 pantograph height.
The horizontal reach of the arm is 40 mm from the mast, which makes the model suitable both for straight track and curves.
Dimensions are chosen to be realistic but also slightly generous to ensure compatibility with different locomotives, layouts and pantographs.
The base block can be modified or rescaled to adjust the installation height if needed.
Printing recommendations:
Printer type: FDM
Material: PLA
Layer height: 0.2 mm
Wall thickness: 2 mm
Infill: 20% (grid or gyroid)
Supports: if needed
Print temperature: ~200°C (nozzle), 60°C (bed)
Size: fits most printers
Notes:
Designed for H0 (1:87) scale railways
Contact wire height approx. 68 mm from rail level
Horizontal reach 40 mm from mast center
Suitable for single-track layouts