1 / 4
H0 Contact Line Mast for 1:87 Model Railways — image 1
1 / 4

H0 Contact Line Mast for 1:87 Model Railways

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a 3D-printable overhead line mast designed for H0 scale (1:87). The contact wire is positioned approximately 68

Rating
0 / 5
Likes
12
Downloads
137
Makes
0
Views
409
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Public Domain

H0 Contact Line Mast for 1:87 Model Railways

use 0.5mm metal wire as overhead line

This is a 3D-printable overhead line mast designed for H0 scale (1:87).
The contact wire is positioned approximately 68 mm above track level, which corresponds well to typical H0 pantograph height.
The horizontal reach of the arm is 40 mm from the mast, which makes the model suitable both for straight track and curves.

Dimensions are chosen to be realistic but also slightly generous to ensure compatibility with different locomotives, layouts and pantographs.
The base block can be modified or rescaled to adjust the installation height if needed.

Printing recommendations:
Printer type: FDM
Material: PLA
Layer height: 0.2 mm
Wall thickness: 2 mm
Infill: 20% (grid or gyroid)
Supports: if needed
Print temperature: ~200°C (nozzle), 60°C (bed)
Size: fits most printers

Notes:

  • Designed for H0 (1:87) scale railways

  • Contact wire height approx. 68 mm from rail level

  • Horizontal reach 40 mm from mast center

  • Suitable for single-track layouts

Tags