Counting matching models…
Bei der Besichtigung des Wagens 905-153 hatten wir den eingebauten Arbeitsplatz vermessen. Bei der Überarbeitung des Modells (Links: H0 , TT ) habe ich den Arbeitsplatz nachgebaut, auch wenn man ihn kaum sehen kann. Zum leichteren…
just a remix of the headband brace, what I've changed about the headphones is that I've made the joint holes smaller so that it fits the pins better, and also moved it so it can slot into place, made the m3 holes bigger so that you don't…
This is an enclosure for the WT32-ETH01 featuring a Type-C connector, with options for including or excluding a POE splitter. links to the module: POE Splitter 48V To 5V Or This Type C Connector WT32-ETH01 Or This I was searching for a…
Description This is a Dutch signalkeeper house with the signal box attached to the house. I have used this model to experiment with the possibilities of my Prusa Mk4 printer. This is my first attempt to print the walls of a building in…
This is a TV antenna to be placed on my printed model houses. The model is best printed with a 0.25mm nozzle and 0.15mm layers. Happy printing.
Can be used with https://www.thingiverse.com/thing:4763902 (81-717/714) Print with supports
This is a set of a century old Dutch working class terraced houses I created in 1:87 H0 scale intended for a model train scene. The model is best printed with a 0.25mm nozzle. I printed the parts in the following batches: Batch 1 - Walls…
I wanted to use famichu's model but with a Bowden fitting. insa- published their own remix for an M10 fitting , but I don't really like the M10 fittings since it allows the Bowden tube to move through the fitting rather than securely…
Die Auflage ist 30 mm breit und sollte in jeden offenen Waggon passen. Drucke: 3x Spanngurte (dünne Wände erkennen einschalten) 3x Rohre stehend mit Brim . Rohre und Spanngurte mit ein wenig Klebstoff verbinden.Fertig. Wer mag kann die…
From the begining the shed where used to store steam locomotves in case of an emergancy. Later the steam locomotives where decomissoned and where replaced with diesel engines. This sheds where found along the Swedish railway system,…
Das ist ein Redesign des Fachwerkhauses von Zemizz https://www.thingiverse.com/thing:4314607 Vielen Dank dafür! Ich habe es anders aufgebaut und auch Kleinigkeiten verändert (z.B. die Position des Kamins) Gedruckt habe ich es in PLA mit…
Editable H0 Rail track for the Rail King toy set. Editable 3mf and STL available! Ready to print for PLA and PETG. Enjoy! Category: Toy & Game Accessories
Introducing our VW T3 Van model kit a meticulously designed and highly detailed addition to your model model railroad layout or diorama. The included scaling chart, ensures compatibility with various layouts and dioramas. With its…
I'm really glad you like it! Please support me by liking and downloading it.
Adapter to use the tablet holder for supporting a WiXC WBH04 Pendant in the original Carvera tablet holder. There is a small slot at the top to insert the metal bracket that comes with the pendant, so that it's magnetically held in place.…
The main issue with the SH02 is the bad fan noise. With these 2 TPU brackets and 2 m3x4mm screws or similar you can significantly reduce the noise of this great filament dryer! Print settings: 1 wall, 15% gyroid infill, 2 top layers, 2…
First atemp at designing a model. Printed fine at 0.12mm with matte gray PLA
V2 of https://www.printables.com/model/1278983-filament-dryer-guide. This worked reasonably but had some friction and the angles needed complicated things. This is definitely a lower friction option. Also easier to install using the…
Another Portable Drill Press, designed around the makita drill XPH07Z . It can be used with a vacuum pump to hold the position, even horizontally. The base can be used to drill round stock with its vee-groove. Makita small router base…
I only use my Comgrow for one dedicated filament at a time. It is on a riser in the back of my setup and I needed a 90 degree angle mount to see the readings so I created this. I tried several threaded designs but ended up just going back…
The model proposed here is a holder for the Seiko NH05 movement. It allows you to securely place the NH05 movement so that you can mount your hands on your dial.
Ersatzrad für Märklin Maerklin H0 Mobile Station 2 MS2 / Spare wheel for Märklin Maerklin H0 Mobile Station 2 MS2 Category: 3D Printing
Zwei Versionen für einen Adapter für 1620er Glockenmotoren, einmal einfach und einmal mit Halterungen für Entstördrosseln Beides zu drucken ohne Stützen Two versions of an adapter for 1620 bell motors, one simple and one with brackets for…
English The idea was to create a tunnel portal similar to the detailed Noch Profi Tunnel. It is designed and scaled to nicely fit two tracks in H0 scale. I recommend to print it horizontally (obviously) and use only one or two bottom…
This is Remix of Ed Johnson's PTFE filament y-splitter to be mounted ontop of a SOVEL SH02 filament dryer with double sided tape.
Für meinen Vater habe ich diverse Bahnsteige und Muster designed, die möglichst nah am Original gehalten sind. Hier veröffentliche ich die Version 1 in 45mm Breite. Die Muster sind so angelegt dass sie beliebig in der Länge aneinander…
Für meinen Vater habe ich diverse Bahnsteige und Muster designed, die möglichst nah am Original gehalten sind. Hier veröffentliche ich die Version 2 in 55mm Breite. Die Muster sind so angelegt dass sie beliebig in der Länge aneinander…
Für meinen Vater habe ich diverse Bahnsteige und Muster designed, die möglichst nah am Original gehalten sind. Hier veröffentliche ich die Version 3 in 45mm Breite. Die Muster sind so angelegt dass sie beliebig in der Länge aneinander…
Made from PLA, printed with 2 walls and 0% infill.
A simple way to attach a hygrometer to your filament dryer. I noticed the accuracy was not quite right on my dryer so I added this as a second check.
Cheminée industrielle – Échelle HO (1:87) Cette cheminée industrielle est proposée exclusivement à l’échelle HO (1:87) . Elle est issue d’un modèle original conçu à l’échelle 1:32 , dont le design a été fidèlement conservé, puis ajusté…
This highly realistic modular wall with columns is designed specifically for H0 scale (1:87) model railways and dioramas . The model is fully modular , allowing you to easily create straight or extended wall sections. It features separate…
Motivation [ New design concept for pluggable assembly without glueing ] Glueing for assembly can be somewhat difficult and you easily mess up your model. Therefore this design approach allows a stable assembly by simply plugging smaller…
Summary A simple but efficient and quick-print clip for connecting H0 tracks. Made especially for Fleischmann, but it should also fit other manufacturers — please let me know in the comments! Print Material: Due to the creep of PLA, I…
H0 scale resin dozer kit with multiple blade and ripper configurations. I hope you enjoy building it!
H0 scale resin model kit of the LR 110, scaleable to other scales. I hope you enjoy building it!
This skid steer loader is modeled after the classic Czechoslovakian UNC 060, a machine still commonly found on construction sites today. Its timeless design makes it a perfect addition to layouts from any time period. The kit comes in…
This model is designed for H0 Scale. The minimum build plate is 256 x 256 mm. Free space under the bridge is 81 mm. N Scale Railway Bow Bridge https://www.printables.com/model/1567636-bow-railway-bridge-n-scale Printing I printed with…
This model is designed for H0 Scale brands. Minimum build plate size is 256 x 256 mm. N Scale Cantilever Railway Bridge https://www.printables.com/model/1548384-cantilever-railway-bridge-n-scale Printing I printed with PLA, 0.16 mm layer…
Attelage type "Tension coupler" utilisé généralement sur le matériel britannique en 00, qui fonctionne mieux à mon goût que les attelages européens de type "boucle". Ce fichier s'imprime très bien avec une buse de 0.4.
Ich wurde mehrfach gebeten, die Verwendung der „Klingenthaler Drehgestelle“ in anderen Projekten zu gestatten. Im August 2025 hatte ich eine flexiblere Version beider Typen erstellt. Um den ursprünglichen Entwurf nicht mit weiteren…
Rails set made for the Siku 1011 tram of my sun, scale 1:87 (H0). Rails are ca 11,4mm apart (insides) and 10cm long. For the end parts you need to push the bar into the base. The joints are tight and need a bit of force to connect the…
TREBATE/ YOU NEED: gumica za čišćenje tračnice 6x66 mm (visina: 19 mm)/easer for clening track 6x66 mm (z axis: 19 mm) 2x vijak M3x16 mm/2x screw M3x16 papir 10x70 mm (za jedan put)/paper 10x70 mm (for one time) i sve ostalo ispisano iz…
"Betonový"patník ideální pro měřítko H0/ "Concrete" bollard ideal for H0 scale
I didn't like how tight the bend radius is if you try to run filament from a mostly full spool out the stock PTFE tube ports on the Sovol SH02. Print this solid or nearly solid in 90A-95A TPU. Remove the OEM threaded passthrough.…
Modell eines modernen Einfamilienhauses im Maßstab 1:87 / H0. Das Modell zeigt ein detailliertes Einfamilienhaus mit 1,5 Stockwerken, einem vorgelagerten Garten und einer Holzterasse mit Glasüberdachung. sehr detailliertes und…
If you are tired of frequently changing the battery in the ZTH05 sensor, this case will allow you to use a regular AA battery. This will significantly increase the operating time of the current sensor. You will need regular holders for…
Tuya Bluetooth Temperature Humidity Sensor LCD TH05F AAA case with room for battery holder The sensor can be found on aliexpress:…
I made this dampener/bushing/sleeve for my HÅG H05, as the original one was worn and, and it started to make a lot of noise because of the metal on metal. This also means, that the rod that holds the chair in place, was starting to wear,…
I made the bottom and sides solid instead of vented. Used the original lid
Historically accurate 3D model of the iconic "Dragon's Teeth" ( Höckerhindernisse ) anti-tank defenses from the Siegfried Line (Westwall). These models are designed following the Regelbau 1939 standards, featuring the classic truncated…
Für den Rangierbetrieb während einer Ausstellung mit Juniormodulen ( les modules junior ) wurden auf den Bahnhöfen Hemmschuhe benötigt, die abgestellte Wagen gegen Wegrollen sichern. Der Entwurf der Hemmschuhe ist an das verwendete…
H0 Concrete fence - SNCB - Cloture beton 1:87
long version. Snaps rather snugly. I suggest making the tolerances a bit bigger. I like it and won't try printing again.
H0 scale fence - SNCB - Improved version, easy to install or move (210mm). Designed for easy installation on foam or cork boards. Each fence post has a hole into which a 1mm thick metal rod can be inserted to keep it upright without using…
Stackable House – Modular Building Set (H0 Scale) I designed a detailed stackable house with plenty of small features and fine details. The model is designed in H0 scale (1:87) , making it ideal for model railways and miniature scenes. Of…
I wanted to create case for home assistant voice command device based on wt32-eth01. Mic should be separated and should not touch the case so i am gonna use soft double-sided sticker. One day I will create the top for the case🙂
At first, I simply put the dryer on top, but I realized that the roof was bending and the dryer was moving due to the printer running. I then bought two 455-long profiles and created this simple stand. The stand fits over the profile and…
This is a friction mount for the Makita Heat Gun XGH02ZK Attachments. Printed in PETG. I used no supports and the print came out just fine. Attached using sheetrock screws.
Update 2025-12-19 A newer, more detailed Mk3 version was released here: Update 2023-10-13 Added 3rd variant with long coupler pocket. Length from bogie axis to end face is 24mm. Used it for the model of gondola car . This is a…
Wenn ihr keine handelsüblichen Räder für Schmalspurwagen in H0m- und TTm verwenden möchtet, können ihr eigene Speichenräder drucken. Selbstverständlich kann an die Drucke auch entsprechend für TT und N verwenden. Ich habe meine Räder ohne…
Europallet made for use with 1:87 H0 scale train modelling. I print these in Prusament Vanilla White and then paint and weather them. Printing upside down is the best orientation designed for Prusa Mk3s+ with 0.25 Nozzle !
A typical Belgian railroad Abri (passager shelter) in concrete. I think this model was mainly used during 1950-1970. They had different versions -sizes- of these. My prototype had ‘liquid’ glass windows put in, but I think it will look…
This is a typical Belgian concrete fence in 1:87. You can find these all over Belgium near railroad stations or other NMBS places. There were different models but this is the one from around 1960-1970 I believe. I did measure this up…
Old style Belgian railroad signal, using the rounded plate from the 50-60's. This is drawn up based on old plans and my own measures. Of course adapted to the printing technology. The base of the model “basis voet” could be modified…
Modern Belgian railroad signal, using the square plate. This is drawn up based on plans and my own measures. Of course adapted to the printing technology. This is the original version for PLA printing, I have worked on a resin print…
Old NMBS luggage cart, this was used on the railroad platforms to carry your suitcases and other stuff around. You can find one of these in the Belgian ‘Karren Museum’ or there is a green one on display in Trainwold in Brussels. Most I…
Jedná se o zjednodušenou napodobeninu spřáhla ROCO.
A sturdy tool holder for quick access to your Makita 6-1/2 in. cordless circular saw. Fit is snug, however, the blade DOES NOT need to be removed (blade guard retracted). Can be wall mounted directly with 4 flathead screws. I chose to…
The famous Snowpierce locomotive, now at 1:87 scale. Functional, put on a Roco chassis. For printing in two variants: one-piece, for FDM printing, or two-piece, for SLA printing. https://www.youtube.com/watch?v=9e81oH7k05s
NOTE: Compared to previous containers I have uploaded, these ones have been redesigned for better print quality by removing small “unprintable" details and “impossible” overhangs. Let me know if you like the new design, in that case I…
Nachbildung eines Bürgersteiges für Modellbahn-Anlagen 1:87. Plattengröße im Original etwa 50x50 cm. gedruckt mit BL P1S und 0.4 Düse Das glätten für die oberste Schicht einschalten um eine Struktur zu erhalten. Viel Spaß!
Please reuse the rubber and nut already attached to the SH02 when installing the replacement .
Case for esp32-eth01 with custom pcb link for custum pcb for esp32-eth01 https://www.huizebruin.nl/product/esp32-eth01-ethernet-pcb-scr-con-01/
Loose recreation of existing VAG part 1H0853586. May require 2%-3% scale up in slicer depending on your printer and filament. Flexible materials strongly recommended.
This is a desiccant case for the SH02. It can be used with silica gel larger than 1.5mm in diameter. NOTE: Please print it in 0.15mm layer height without supports. Added 1.0mm gap models too(January 20th , 2025)
Bei der Besichtigung des Wagens 905-153 hatten wir den eingebauten Arbeitsplatz vermessen. Bei der Überarbeitung des Modells (Links: H0 , TT ) habe ich den Arbeitsplatz nachgebaut, auch wenn man ihn kaum sehen kann. Zum leichteren…
H0 Tunnel 1:87 works for Märklin C-Gleis and other brands like Roco, Fleischmann, Piko. H0 Tunnel, single track, with small windows and without windows, connectable with connectors. Length of the tunnel is 195mm (~7.7in). Caution: It is…
just a remix of the headband brace, what I've changed about the headphones is that I've made the joint holes smaller so that it fits the pins better, and also moved it so it can slot into place, made the m3 holes bigger so that you don't…
Wichtiges Update 2024-10-07: Offene Variante ersetzt, da sich die Längsträger mit Radaufhängungen sich beim Export der angepassten STLs aus FreeCAD nach weiter innen verschoben haben. Geschichte Erbaut 1898 von Herbrand für die…
E458 or 110 locomotive that has been run by CSD (czechodlovakian railways), now is part of CD and ZSSK. Model is optimized for TT 1:120 with chasis and boogies - almost ready to go. Can be printed also in H0 and N(but with more precise 3D…
I was annoyed that I had to buy this when it wasn't provided with my newly delivered washer. Now you don't have to.
This is a tunnel portal (tunnel door) for the existing tunnel elements . It can be connected with the given connectors. It is symmetrical. Connecting two tunnel portals creates a micro-tunnel. H0 Tunnel 1:87 works for Märklin C-Gleis and…
This is a fix to the sharp angle in the Comgrow/Sovol SH02 Filament Dryer Box. The factory guide would cause excess bends and jams causing failed prints unable to pull form the box. This puts it more of a vertical instead of a parallel…
Sauna for H0-scale scenery, which can be printed with a (decent) FDM printer. This has been one of my first attempts on creating a (relatively) detailed model for my H0 railroad and it pushes the limits of my printer, but in the end I'm…
On my model train layout I wanted a construction yard were a new house was build. Since the type of house and construction I was looking for is not available as a kit, I decided to design and print it myself. It's not perfect and…
These fences can be used on a H0 Scale Meadow. No support needed. Assembly takes some patience, just make sure you position the linkages between the poles and fences correctly and sand the linkages when needed. Print Settings Printer…
For my H0 model railway I needed some piles to form a nice wall. Couldn't find one to be printed without a Resin printer, so I designed one myself that can be printed on most common 3D Printers. Post-Printing Category: Hobby
H0 1:87 Trainstation Platform, Eisenbahnstation Bahnsteig. You can connect two platform elements with the connector and build a longer platform. You get four versions created for the C-Gleis of Märklin & My World: 1026mm FR like high…
Ich habe eine DCC-EX-Zentrale mit einem Mega 2560 Board, einem L298HN Motor Shield und einem ESP-01 WiFi-Modul aus einem Teile-Kit gebaut. Für meine kleine Schmalspurbahn im Maßstab 1/120 (TTm) wurde ein 9-mm-Spur Programmiergleis (Trix…
![[H0] Kit Cheminée industrielle V2.0](https://media.printables.com/media/prints/5dcab612-6fd8-4d99-be65-19af9719a717/images/12055532_91df9bab-a674-4198-8e43-e88f3df7a743_e8149609-30d2-430d-8ce4-a7f9a623e349/pxl_20260215_115242462.jpg)
