1 / 3
Esp32 WT32-ETH01 Usb Type C Snap Fit Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case for the WT32-ETH01 with a USB Type C trigger board for power.
- Rating
- 5 / 5
- Likes
- 45
- Downloads
- 673
- Makes
- 2
- Views
- 3,356
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A case for the WT32-ETH01 with a USB Type C trigger board for power. The top snaps into the body, no screw needed here.
Also needed:
- 5 V USB Type C Trigger board, female, e.g. https://www.aliexpress.com/item/1005005995374256.html
- jumper wire
- 2x self tapping screw M2x4 for the WT32-ETH, e.g. https://www.aliexpress.com/item/1005003642422063.html
- super glue
Cut the jumper wire and solder it to the trigger board. Plug the other side to the power pins of the esp board. Glue the Usb-C board into the case.
I use it as an ethernet Bluetooth proxy with Esphome.
The snap mechanism is inspired by the great Adafruit snap fit case tutorial:
It works very well.