Nödmast LED Bulb Cover/Diffuser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Didn't like the original tint of the Nödmast IKEA light so I made a coloured bulb/cover/diffuser to replace it
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Share Alike
After buying the Nödmast lamp from IKEA I liked everything about it except for the colour it was producing, so I made a replacement cover/diffuser for the LED.
First take the original one out, you'll just need a flat screwdriver to pry it out of its socket (relatively low force). Then align the notches on the printed cover/diffuser and push it down until it clicks in place. And you're done!
I have a lot of red ambient lighting at my place so I went for the same colour, but I imagine yellow/orange/green/etc can also look interesting. Before anyone asks, I've printed it in PLA and haven't noticed any temperature-related issues so far.
I used 0.4mm nozzle with 0.08mm layer height, but I think it'll work with most settings with supports added.
Included the .f3d design file in case anyone wants to edit the model.