1 / 1
RAK19007 & RAK19003 + solar 18650 charger mounting plate for electrical box — zdjęcie 1

RAK19007 & RAK19003 + solar 18650 charger mounting plate for electrical box

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A mounting plate for in an electrical box for RAK19007 and RAK19003 and a seengreat solar charger for an 18650

Ocena
0 / 5
Polubienia
4
Pobrania
15
Wydruki
0
Wyświetlenia
278
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial

I recently bought these boxes for meshtastic nodes. I made a mounting plate for inside the box for my Lora mesh nodes using the 19007/19004 mainbords and a seengreat solar power board for an 18650 cell. The solar board has the screw holes at the same spot as a raspberry pi.

The electrical box has m4 screw mounts with an offset of 102mm. 

I use m2.5 heatset nuts in the holes for the solar board and rak boards to screw into. 

I included the freecad file so you can modify the variables and change the offsets or diameters for the screwholes.

The photo is an earlier version where i still had to change some of the offsets of the screw holes

Tagi