Liczymy pasujące modele…
Battery Tray V2 (01/17/2026) Adding an additional battery tray for better clearance. This is the battery tray that I would recommend using for the 5.9"x3.9"x2.8" junction box (second to last photo) Original The smallest size that this…
This is my take on a minimalistic portable mesh node for the RAK19003. Prints with no supports! Battery life is well over a week. Bluetooth companion went from from 90% to 75% in 7 days with several flood adverts and 1-3 messages sent…
The RAK19003 is mounted with three M2.5 screws that come with the board. The lid snaps securely into place. There is a slot to insert the pcb antenna that comes with the RAK board and vent holes on the back to allow the temperature and…
There are many much cheaper options out there , this fulfills my personal LARP needs. At it's core, this is basically a greebled rectangle. Fits in most pouches that can hold a MPU5, Streamcaster, AN/PRC152, etc. Has survived a couple of…
Designed to nicely fit into a pocket. Takes: Module: https://www.amazon.com/RAKwireless-WisBlock-Meshtastic-Starter-RAK19003/dp/B0DFMMTQZM Battery https://www.amazon.com/dp/B0B7N2T1TD There are two versions of the case. With external…
Print one frame, lid and base and use two m3x8 screws to attach them together.
I really like the enclosures from @AlleyCat so I made a version for the RAK19003. The Bluetooth antenna is attached to the side. To mount the board and the switch, you’ll need short screws, or you can use the printed screw washers and use…
Small, portable RAK19003 case with room for RAK12500 GPS module and external LoRa antenna. Fits a 1500mAh lipo battery (50 x 35 x 8mm) such as this one. Use some double sided tape if you don't want the battery to move inside. Case is…
📄 Meshtastic Node Bracket for 150 × 100 × 70 mm IP67 Case ✅ Compatibility Case Fit: Specifically designed for the 150 × 100 × 70 mm IP67 enclosure from Aliexpress I recommand using as it is the go to case for outdoor applications. IP67…
A small enclosure for an indoor sensor. Only 48 x 51 x 22 mm (w x l x h) small, with enough space for a RAK19003 Base Board, a WisBlock Core module and up to 2 sensor modules. Easy access to the USB port and space for a 500mAh battery.…
Added flaps to the lid. Removed holes from the case. Modified screwholes to take M2 threaded inserts. Thank you for the author for sharing the step files!
Want a bigger version? Check out my other version for the RAK19007 and a 1.2W solar panel, it's about twice size and power and has all the same features. IMPORTANT! This model uses lithium batteries which can cause injury or death if…
https://www.printables.com/model/286662-rak19003-case-for-meshtastic I made the above case for my Rak19003 meshtastic radio, and my friends said it looked like an explosive detonator. So i thought that the case looked like the same shape…
This is my self designed enclosure for a small portable node using RAK19003 . This version should take in all of the versions of RAK19003 but the LED locations are taken from version E (same as versions C and D). Following images…
This is a small stand I made to mount a RAK 19003 board with a TP4056 Lithium Battery Charging control board into a HarborFreight solar flag pole. Light to use as a Meshtastic Solar Node....There are mounting holes to screw down the RAK…
I designed this for deploying Meshcore repeaters in a tidy, quick and repeatable manner. This mount is for attaching a RAK19003 PCB to the grid plate you can find on my profile. The PCB is secured using the M2.5 bolts which come supplied…
This is a model to make a water resistant case for a RAK based LoRA node. Its made to have a n-type chassi mounted connector on top that is sealed with a o'ring and a 145x145mm solar panel on the front. It has build in cannels for cable…
I recently bought these boxes for meshtastic nodes. I made a mounting plate for inside the box for my Lora mesh nodes using the 19007/19004 mainbords and a seengreat solar power board for an 18650 cell. The solar board has the screw holes…
Battery Tray V2 (01/17/2026) Adding an additional battery tray for better clearance. This is the battery tray that I would recommend using for the 5.9"x3.9"x2.8" junction box (second to last photo) Original The smallest size that this…
This is my take on a minimalistic portable mesh node for the RAK19003. Prints with no supports! Battery life is well over a week. Bluetooth companion went from from 90% to 75% in 7 days with several flood adverts and 1-3 messages sent…
I needed a case for a RAK4631 on the RAK19003 baseboard to fit to the back of a solar panel. This model has standoffs for the three screwpoints on the RAK19003 and an inset to put the bluetooth aerial, and a hole to put a aerial…
A 10" rack insert for the Meshtastic RAK19003. Includes two (2) SMA ports. Print PLA or PETG, your choice. No supports.
The RAKwireless WisBlock Modular System offers an extension cable to place sensor modules apart from the Base Boards, the RAK19003 VE.
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
WARNING: Requires modification to fit battery connector: Option1 - pop off battery connector plastic and solder battery wires directly Option2 - desolder battery connector and solder battery wires directly Option3 - options 1 or 2 plus…
Me make these things just for me and you but no for you make money. No copy, sell, trade, or take my design without ask me first. If you want to sell them in a small way (not big business), talk to me here. Follow rules of Creative…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
This is a weatherproof (or waterproof depending on the version) case for a RAK19003 based Meshtatic node. Since the RAK19003 includes a Li-ion charging circuit and solar panel input port, the cases have room for a 2000mAh Li-ion battery…
This is a simple case for the rakwireless RAK19003 Mini Base Board to, in combination with the RAK4631 or RAK113100 Core Modules, create a very simple USB connected Meshtastic node. My goal here was to create the most minimalist case I…
This is meant to be a stationary node, not a portable handheld device. It features: compartment for up to 4x 18650 lithium-ion cells (long enough to accommodate protected cells) M2.5 mount points for RAK19007 or RAK19003 base board M2…
I needed a simple model of the rak19003 so decided to model one from the board I already had it isn't super detailed but it is enough to make cases for this board
