RAK19003 Case External Antenna with External Switch.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mesh node RAK19003 external with External switch for going full covert.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my first remix. Based off of the 19003 case made by N7TRX this inner shell features a external on/off switch for conserving battery and going full Covert, and USB-C port cord protection. Switch is wired into the negative wire on the battery , and the wires ran in the channel from the battery side to the board side of the inner shell, through the channel in the USB-C port charger protector.
Battery: Standard size 103450 li-ion with 2mm pitch JST.
Note: when switch is in off position and plugged into usb port for charging , device will be powered but battery will not charge.
Switch used is generic switch, with one of the end legs cut off, switch hole will need slightly clearance for the exact switch you choose, exact size of switch .502in x .265in
see this link for outer shell print file, original description, and original designers prints: https://www.printables.com/model/1564591-portable-mesh-node-rak19003-external-or-internal-a/remixes